Full face mask: how to use a gas mask, which one is better - power air supply
Release time:
2020-07-16 15:02
Source:
First of all, check the gas mask before use:
1. Check and confirm that the appearance of the gas mask and filter box is intact.
2. Check and make sure the filter box is not expired, damp and rusty.
3. Check the airtightness of the whole set of respirators. Connect the mask to the tank. After putting on the mask, block the air inlet of the air tank with your hand and inhale deeply. The respirator set is good and serviceable if no air is getting in , otherwise, it should be repaired or replaced.

Second, how to use gas masks
correctly 1. Gas masks are suitable for places where the oxygen concentration in the air is not lower than 18%. Therefore, before use, it should be tested and confirmed that the oxygen content in the air in the poisonous area meets the requirements.
2. Check and confirm that the 3M filter cotton of the gas mask body and the filter box is not damaged, and the filter box is within the service life.
3. Install a gas mask. If the gas mask is equipped with filter cotton, first install the 3M filter cotton on the filter box, and then install the gas mask body after assembly. When installing the filter box, pay attention to the direction of rotation. Generally, it can be stuck on the corresponding buckle of the full mask in a clockwise direction .
4. Wear a full face mask . When wearing a gas mask, you should stop breathing, close your eyes, grasp the sides of the mask with your thumbs inward, spread the mask outward with your four fingers, put on the gas mask evenly with both hands from bottom to top, and adjust the mask body to fit the face.
5. Do not use respirators in enclosed spaces such as tanks and tanks.

Third, properly manage and protect gas masks:
gas masks should be stored in a dry, clean, and well-ventilated place to prevent moisture and overheating, and the filter box should be sealed and stored.
Which is better for a gas mask ? When choosing a gas mask, we should pay attention to the problem of power air supply and choose a gas mask that suits us.
News
2024-06-14
EU Declaration of Conformity Annex IX PPE Regulation (EU) 2016/425
EU Declaration of Conformity Annex IX PPE Regulation (EU) 2016/425
2022-11-21
The main purpose of dust masks?
The dust mask is made of odorless and non-allergenic raw materials. Now it is especially suitable for clean rooms, medical use to prevent bacterial and viral infection, and industrial use to block tiny dust. This product is produced by a fully automatic production line. Let me introduce the main uses of dust masks?
2022-11-29
What are the advantages of dust masks?
The product quality of the dust mask is hard, and it has won the favor of users at home and abroad. So what are its advantages? In fact, it has many advantages. Let me briefly talk about it below. Friends who want to know more, come and watch.
2022-12-09
A basic introduction to dust masks?
The development prospect of the dust mask industry is very good, because it brings more benefits to the enterprise when it is used, so it is favored by customers. In order to make everyone more familiar with it, let's talk about it next. What is the basic introduction of the dust mask? I hope it can help more people.
Product Center
Site Navigation
Gao Jian Guangzhou City Labor Insurance Ltd.
Contact:Mr. Yang / Mr. Wu
Tel:020-34040376 020-34047280
Fax:020-34041396
Mobile:13710729228/13602857846
Email:manager@gzgaojian.com
Address:No. 18, North Fourth Lane, Guanhuan, East Ring, Longtan, Haizhu District, Guangzhou
Scan and follow us
Copyright © 2023 Gao Jian Guangzhou City Labor Insurance Ltd. Powered by www.300.cn | SEO business license
manager@gzgaojian.com
在线留言