Full face mask features
Release time:
2021-07-27 15:51
Source:
full face mask;Features
1.The large windows are designed to provide a wide view and effectively reduce the feeling of depression. . Windows are made of impact-resistant polycarbonate. While ensuring a good line of sight,. It can effectively protect the eyes and face;
2. Reasonable airflow design inside the mask. It can effectively prevent fogging in the window. Ensure a clear line of sight;
3.Optimized design of the mouth and nose mask in the mask. Minimize reabsorption of exhaled air;
4.There is a sound diaphragm while wearing a mask to ensure a good sound Language exchange;
5.conformsEN 148-1Standard standard threaded interfaceRD40,. Can be used with standard threaded interface canisters;
6.Lightweight design, only heavy490 grams,. It can effectively reduce the fatigue of wearing for a long time.
Full face mask;Air tightness test
Gas masks mainly have full face masks-Filtering full face and half face masks-filtering half mask. . When wearing a gas mask, the user should first choose a suitable mask according to the size of the head. . Secondly, adjust the middle and upper headbands to a suitable position, loosen the lower headband, and grasp the sides of the mask with both hands. Hold your breath,. Close your eyes, cover the chin of the mask, and stretch the headband back and up with both hands at the same time. Put on the mask from bottom to top, tighten the headband so that the mask fits your face. Then take a deep breath and open your eyes. . Also, care should be taken not to press the headband and hair into the tight frame of the mask. Also do not bend the mask's headband claws into the mask. .
Check after use
Clean, disinfect and maintain the full mask after use. Make sure the full mask is always in good combat readiness.
1.Remove the air supply valve on the full cover. Remove the cylinder on the rear bracket;
2.Wipe off the oil or harmful dust on the feat, . Inspect for signs of damage;(If there are any damaged parts or components)
3.Damaged parts should be Repair or replace promptly;
4.Disinfect the product with a mild neutral disinfectant. Then scrub with clean water,. Finally, let it dry naturally;
5.Check air tightness after reinstallation;
6.After passing the inspection,. Enter combat readiness.
previous page
previous page
News
2024-06-14
EU Declaration of Conformity Annex IX PPE Regulation (EU) 2016/425
EU Declaration of Conformity Annex IX PPE Regulation (EU) 2016/425
2022-11-21
The main purpose of dust masks?
The dust mask is made of odorless and non-allergenic raw materials. Now it is especially suitable for clean rooms, medical use to prevent bacterial and viral infection, and industrial use to block tiny dust. This product is produced by a fully automatic production line. Let me introduce the main uses of dust masks?
2022-11-29
What are the advantages of dust masks?
The product quality of the dust mask is hard, and it has won the favor of users at home and abroad. So what are its advantages? In fact, it has many advantages. Let me briefly talk about it below. Friends who want to know more, come and watch.
2022-12-09
A basic introduction to dust masks?
The development prospect of the dust mask industry is very good, because it brings more benefits to the enterprise when it is used, so it is favored by customers. In order to make everyone more familiar with it, let's talk about it next. What is the basic introduction of the dust mask? I hope it can help more people.
Product Center
Site Navigation
Gao Jian Guangzhou City Labor Insurance Ltd.
Contact:Mr. Yang / Mr. Wu
Tel:020-34040376 020-34047280
Fax:020-34041396
Mobile:13710729228/13602857846
Email:manager@gzgaojian.com
Address:No. 18, North Fourth Lane, Guanhuan, East Ring, Longtan, Haizhu District, Guangzhou
Scan and follow us
Copyright © 2023 Gao Jian Guangzhou City Labor Insurance Ltd. Powered by www.300.cn | SEO business license
manager@gzgaojian.com
在线留言